Blocked drains
Blocked Drain Clearing in Perth
Slow gullies, gurgling fixtures and overflowing floor wastes usually have a traceable cause. We clear the blockage and tell you what we found.
In short: Clearing a blocked drain is only half the job. Identifying why it blocked — roots, grease, a collapsed section or a fixture issue — is what stops it happening again.
Common causes in Perth homes
- Tree root intrusion at joints in older clay lines
- Grease and food waste in kitchen branches
- Wipes and non-flushable items in toilet lines
- Sand and silt ingress in coastal and sandy soils
- Damaged or misaligned sections of pipe
What we do
Clear the blockage, check the fixtures affected, and advise whether the line needs further investigation. If a structural problem is likely, we say so rather than clearing the same drain every few months.
Related pages
Questions
Frequently asked questions
Hot Water Problem? Start With a Clear Answer.
Send through what is happening and a few photos of the system. You will get a straight assessment of your options and a written quote — not a sales pitch.
- Upload system photos with your enquiry
- Servicing Perth, Western Australia
- Contact us to confirm current availability
