Question 1

How quickly can a hot water system be replaced in Perth?

Accepted Answer

Many straightforward like-for-like changeovers are completed within a few hours once the replacement unit is on site. The realistic timeframe depends on unit availability, the type of system, whether the installation position needs work and how the property is accessed. Contact us with the details and we will tell you what is achievable rather than quote a time we cannot hold.

Question 2

Which hot water system is right for my home?

Accepted Answer

It comes down to the energy sources connected at your property, the space available for the unit, how many people live there and when hot water is used. Gas storage and continuous flow suit homes with reticulated gas; heat pump and electric storage suit all-electric homes. The correct sizing follows from occupants and bathrooms, not floor area.

Question 3

Is a heat pump hot water system suitable for Perth?

Accepted Answer

Perth's mild climate suits heat pump systems better than colder parts of Australia, and they use substantially less electricity than conventional electric storage. Suitability still depends on having an outdoor position with airflow clearance, acceptable fan noise for neighbours and a suitable electrical circuit.

Question 4

What size hot water system do I need?

Accepted Answer

Sizing follows the number of occupants, the number of bathrooms and whether outlets run at the same time. A storage system is sized on volume and recovery rate; a continuous flow system is sized on litres per minute at a given temperature rise. We confirm the sizing at the property rather than guessing from the outside.

Question 5

Should I repair or replace an old hot water system?

Accepted Answer

If the tank itself is leaking, replacement is normally the only practical answer. If a valve, thermostat, element or ignition component has failed on a system that is still relatively young and otherwise sound, repair can be reasonable. Age, repair history and the cost of the repair against a new system all feed into the decision.

Question 6

Can an electric system be replaced with a heat pump?

Accepted Answer

Often yes, and it is one of the more common upgrades. The changeover needs a suitable outdoor location with clearance for airflow, a position where fan noise will not disturb bedrooms next door, and confirmation that the existing electrical circuit and any off-peak arrangement will suit the new unit.

Question 7

What causes a hot water system to leak?

Accepted Answer

A weep from the relief valve during heating can be normal, but constant discharge usually points to a faulty valve or excessive mains pressure. Water pooling under the unit generally indicates internal tank corrosion, which cannot be repaired. Leaks at fittings and connections are usually repairable.

Question 8

What is the difference between whole-house and under-sink filtration?

Accepted Answer

Whole-house filtration is installed at the incoming water main so every tap, shower and appliance receives filtered water — typically for sediment and chlorine taste and odour reduction. Under-sink filtration treats water at one point, usually the kitchen, and can use finer media because it only handles drinking and cooking water.

Question 9

How often do water filter cartridges need replacing?

Accepted Answer

Follow the manufacturer's stated interval for the specific cartridge, which is normally expressed in months or litres treated. Household usage and incoming water conditions both affect actual life. A noticeable change in flow or taste is a sign the cartridge is due.

Question 10

Which Perth suburbs do you service?

Accepted Answer

We provide residential plumbing, hot water replacement and water filtration across the Perth metropolitan area. Use the suburb search on our service areas page to check your suburb, or call and ask.

Plumbing Questions Perth Homeowners Ask

Hot water and filtration basics

Hot water replacement

Water filtration

Repairs and maintenance

Hot Water Problem? Start With a Clear Answer.

Plumbing Questions Perth Homeowners Ask

Hot water and filtration basics

How quickly can a hot water system be replaced in Perth?

Which hot water system is right for my home?

Is a heat pump hot water system suitable for Perth?

What size hot water system do I need?

Should I repair or replace an old hot water system?

Can an electric system be replaced with a heat pump?

What causes a hot water system to leak?

What is the difference between whole-house and under-sink filtration?

How often do water filter cartridges need replacing?

Which Perth suburbs do you service?

Hot water replacement

How much does hot water replacement cost in Perth?

How long does a hot water replacement take?

What are the signs my hot water system needs replacing?

Can you replace a hot water system in the same position?

Do I need to be home for the replacement?

What warranty applies to a new hot water system?

Water filtration

Does whole-house water filtration remove chlorine?

What is the difference between a water filter and a water purifier?

Do I need filtration if I am on Perth scheme water?

Where is an under-sink filter installed?

How often should filter cartridges be replaced?

Can filtration be installed in an apartment?

Repairs and maintenance

What should I do if a pipe bursts?

Why does my toilet keep running?

What causes recurring blocked drains?

Can you find a leak that is not visible?

Hot Water Problem? Start With a Clear Answer.